Yacht rope

What are the knotting methods for trailer ropes?

Double knot tying 1. First, loop the rope around the object twice. 2. . Then pass the rope end through the second loop and tighten it with force. 3. Finally, just tie a half knot. Half knot tying 1. First, tie a figure eight knot in the middle of the rope, cross the rope ends first, then the rope ends bypass the main rope, and tighten it after passing through the rope loop. 2. Next, pass the rope end along the knot in the opposite direction through the end of the rope. 3. Then pass the rope head through the first knot (as shown in the figure below) and wind it back under the knot. 4. In the process of winding back, the rope head needs to pass through the lower loop.

Why should a piece of cloth be used for the trailer rope

Precautions for selecting trailer rope are as follows: 1. Trailer tools with striking colors shall be selected, such as yellow, blue, fluorescent green, fluorescent red, etc. If the color is not striking enough, hang colored cloth strips on the trailer. When towing at night, try to use the trailer rope with reflective materials to increase the warning effect. 2. The trailer tools shall be installed at the same side of the trailer hitch of the front and rear vehicles. If the fault vehicle is the left hitch, the tractor shall also select the left hitch to ensure that it can drive straight after going on the road. 3. Pay attention to communication and cooperation between front and rear vehicles. 4. Control the safe distance between vehicles.